Laser Tattoo Removal RT6

Feichi Non-Invasive Eyebrow Removal (No Water Addition)

1. No skin breakage, no bleeding, no scabbing, painless, no hair damage, safe to get wet on the same day, and can apply makeup the next day, eliminating customer fear of eyebrow removal;

2. Eyebrow removal, tattoo removal, eyeliner removal, mole removal, freckle removal;

3. Black Doll Laser Treatment, whitening, brightening, pore shrinking.

Operating Instructions:

1. Before use, ensure the water tank is full and the foot pedal is properly installed. Both the client and the operator should wear goggles and eye protection.

2. Select the appropriate probe based on the client's desired procedure (refer to the probe's instructions).

3. When using non-invasive eyebrow removal, the handle must be perpendicular to the treatment area. Start with an energy of 200mJ and a frequency of 3-5Hz. Inexperienced users can start with 1Hz. Apply directly to the skin or slightly elevated. Avoid repeated application to the same spot; apply only enough to break down the pigment.

4. When using the 1064nm probe for freckle removal, apply until the spots turn white. If unavailable, increase the energy and raise the handle; this will reduce the focus and increase the energy. When using the 532nm probe for epidermal freckles, keep the tool perpendicular to the skin. When removing tattoos, select the appropriate probe based on the color. Always protect your eyes; never expose them directly to the light.

5. Before using the Black Doll laser treatment, apply nano-carbon powder evenly to the face, but not too thickly. Allow the powder to dry completely before proceeding. Hold the probe 3-5cm away from the skin during the procedure.

6. A course of treatment consists of three sessions, each lasting approximately one month, to allow sufficient time for the broken-down pigment particles to be absorbed. Non-invasive eyebrow removal can be done every fifteen days.

Results Feedback：